KDR Resins flooring systems
KDR Resins is a British, family-owned manufacturer that formulates and makes its own resin in the UK. Where most of the big flooring names are international groups, KDR is smaller and closer to home with its own resin chemists mixing epoxy, polyurethane, methacrylate and polyaspartic systems for floors, walls and coving. For some projects that changes what is possible on lead time and support. Surface Specialists is tied to no manufacturer. Where a KDR system is the right fit, it is specified and installed by an experienced specialist contractor from our network. Listing KDR here does not imply a partnership, approval or accreditation.
A British manufacturer that makes its own resin
KDR formulates in-house rather than rebadging product made elsewhere. That has real consequences for a specifier. Technical support comes from the manufacturer that wrote the formulation, not a distant call centre. Lead times on UK-made product tend to be shorter than importing from overseas, which can matter when a project has a fixed handover date. And because the systems are made here and kept in production, a compatible product is usually available if a floor later needs a repair or an extension.
Making its own chemistry across epoxy, polyurethane, methacrylate and polyaspartic also means KDR can cover most industrial and commercial needs from one supplier, which keeps a mixed specification consistent.
Fast-cure floors and the cost of downtime
The KDR feature that wins projects is speed. Standard epoxy can need days before a floor is back in full use and on a working site that downtime is often the most expensive part of the job, not the floor itself. KDR makes fast-cure polyaspartic and methacrylate systems that can return an area to service far quicker – sometimes within a day where temperature, build-up and service conditions allow. For a warehouse aisle that cannot sit idle, a food line that has a short cleaning window or a retail unit that trades seven days a week, cutting the closure is worth more than the difference in material cost.
Floors, walls and coving as one system
KDR does not stop at the floor. It makes matching wall coatings and seamless coving, which matters in hygiene-sensitive areas. In a food or pharmaceutical room the floor, the coving and the lower wall need to work as one sealed surface with no hard right angle for residue to collect in. Sourcing the floor, the cove and the wall coating from one manufacturer keeps them compatible and makes the whole finish easier to clean and to audit.
The KDR system families
KDR publishes its range as a set of system categories rather than one flagship product. These are the groups that come up most often and what each one is built to handle.
| System category | What it is | Where it fits | Worth knowing |
|---|---|---|---|
| Polyurethane floor screeds | Heavy-duty polyurethane laid at thickness rather than brushed on | Food and drink production, cold stores, washdown areas | Handles steam cleaning, hot spillage and thermal shock that would lift a standard epoxy |
| Epoxy and polyurethane industrial resins | Coatings and self-levelling systems built for wear | Warehouses, factories, production halls, workshops | The default answer for forklift and pallet traffic on a sound slab |
| Polyaspartic and UV stable systems | Fast-curing coatings that hold their colour in daylight | Showrooms, entrances, top decks, external bays | Will not yellow the way a standard epoxy does in sunlight |
| Fast cure MMA systems | Methacrylate systems that reach full cure in around an hour | Kitchens, retail units and cold stores where downtime is the constraint | Can be laid at low temperature, so a refit happens overnight rather than over a weekend |
| Car park decking systems | Trafficked waterproofing for decks and ramps | Multi-storey and podium decks, ramps, service bays | Has to bridge cracks and move with the structure, not just coat it |
| Primers | Bonding and sealing layers laid before the finish | Every system, on concrete, screed or an existing floor | The layer that decides whether the floor above it stays down |
Where KDR floors are specified
- Warehousing and industry: hard-wearing epoxy and PU floors, set out on our industrial resin flooring page.
- Food and drink production: washdown-ready PU screeds with matching walls and coving.
- Sites with tight downtime windows: fast-cure systems that reopen an area quickly.
- Pharmaceutical and cleanroom areas: seamless, easy-clean and static-controlled finishes.
- Retail and commercial interiors: decorative finishes that hold up under footfall.
Epoxy, polyurethane or fast-cure
The chemistry follows the room. Epoxy suits dry industrial and commercial floors, polyurethane handles heat and washdown and where downtime is the deciding factor a fast-cure polyaspartic can reopen a floor in a fraction of the time. Our guide to epoxy and polyurethane flooring covers how the first two compare and the survey confirms whether a fast-cure system is worth it for your floor.
Getting a KDR floor specified
Surface Specialists does not fix on a brand before the project is understood. We arrange a free site survey with a specialist contractor from our network. The contractor assesses the substrate, the downtime window and the way the floor will be used, then specifies the system that fits, which may be a KDR build or another brand from our resin flooring brands hub and provides a written quotation. Whatever goes down, the slab decides how long it lasts, so subfloor preparation is specified with as much care as the resin.
Frequently asked questions
Is KDR a British manufacturer?
Yes. KDR is an independent, family-owned company that formulates and makes its resin systems in the UK. For some projects that means shorter lead times and support direct from the people who wrote the formulation, though the right system is still chosen on performance rather than origin.
Can a KDR floor be installed quickly?
Often, yes. KDR makes fast-cure polyaspartic and methacrylate systems that reopen a floor far quicker than standard epoxy, which suits sites where closure is costly. Whether a fast-cure system suits your floor is confirmed at survey.
Does KDR make matching walls and coving?
Yes. It makes wall coatings and seamless coving alongside its floors, which matters in food and pharmaceutical areas where floor, cove and wall need to form one sealed, cleanable surface.
Why choose a UK-made resin over an international brand?
Mainly lead time and support. UK manufacture can mean quicker delivery and direct technical help, which helps on a tight programme. On performance a KDR system is specified against the same criteria as any other brand.
Does Surface Specialists only work with KDR?
No. The network is brand-agnostic. A contractor specifies whichever manufacturer suits the project at survey and KDR is one of several we work with.
Who provides the quotation for a KDR floor?
The specialist contractor, after the survey. Surface Specialists arranges the survey and matches you to the contractor, but the written quotation and the contract for the work rest with the contractor who carries it out.
Key takeaways
- British and in-house: KDR formulates and makes its own epoxy, PU, methacrylate and polyaspartic systems in the UK.
- Speed sells it: fast-cure systems cut downtime, often the most costly part of a floor project.
- Floor, wall and cove: matching systems for hygiene areas that need one sealed surface.
- Lead time and support: UK manufacture can mean quicker delivery and direct technical help.
- The survey decides: a contractor specifies and quotes and recommends another brand where it fits better.
Get the right system specified
If a KDR system might suit your floor, the next step is a survey rather than a product code. We arrange a free site survey with a specialist contractor from our network, who assesses the substrate and the environment, specifies the right system and provides a written quotation with no obligation. Contact us to arrange one.